Cabinet Painting & Refinishing Built to Survive Daily Kitchen Use
Cabinets take more abuse than any other painted surface in the house. We prep and coat them to match, using adhesion-tested primers and hard-cure topcoats.
Free estimates · Same-day service available · No obligation
Why Cabinet Refinishing Fails Without the Right Prep
Kitchen cabinets are handled, wiped, bumped, and exposed to grease and steam daily. A finish that isn't properly bonded to the substrate underneath will chip at hinges and handles within months, regardless of how good the topcoat looks on day one.
Degreasing before sanding
Cooking oil residue left on cabinet surfaces prevents primer from bonding, even after sanding. We degrease first, then scuff-sand.
Substrate-specific bonding primer
Melamine, laminate, MDF, and solid wood each need a different bonding primer to prevent peeling at stress points like door edges.
Hardware removal and labelling
Hinges, handles, and soft-close mechanisms are removed and labelled so cabinets go back together without hardware mismatches.
Controlled cure time between coats
Rushing recoat windows on cabinets is one of the most common causes of soft, easily marked finishes.
Brush-Applied Cabinet Paint Often Shows Every Stroke
Cabinets painted by hand with a standard wall paint frequently show brush marks, uneven sheen, and soft durability that scuffs at the edges within the first year, particularly on high-contact doors and drawer fronts.
Sprayed, Hard-Cure Finishes for a Smoother Result
Where the setup allows, we spray cabinet doors and fronts off-site or in a contained area for an even, low-texture finish, using coatings formulated to cure hard enough to resist daily kitchen contact.
Our Cabinet Refinishing Process
Cabinets are treated as a separate discipline from wall painting, with their own sequence.
- 1
Hardware removal and labelling
Doors, drawers, hinges, and hardware are removed and catalogued by location.
- 2
Degrease and sand
Surfaces are degreased, then scuff-sanded to promote mechanical adhesion.
- 3
Bonding primer
A primer matched to the substrate is applied and allowed to cure fully.
- 4
Spray or fine-finish application
Topcoats are sprayed or fine-brushed in controlled conditions for an even sheen.
- 5
Reassembly and adjustment
Hardware is reinstalled and hinges adjusted so doors sit flush and close properly.
What Sets Our Cabinet Work Apart
Cabinet refinishing rewards patience with prep and cure time far more than it rewards a fast turnaround.
Substrate-matched primers
We select bonding primers based on whether cabinets are laminate, MDF, or solid wood.
Hardware tracking
A labelling system prevents hinge and handle mismatches during reassembly.
Full cure windows respected
Coats are allowed to cure per the data sheet before handling or reinstalling doors.
Even sheen control
Spray application reduces brush marks and lap lines across large door surfaces.
Low-odour coating options
Available for households wanting to minimize fumes during an in-home project.
Written scope per cabinet run
Quotes break down prep, priming, and finish coats by cabinet section.
Cabinet Painting Questions
Can you refinish cabinets without replacing them?
In most cases, yes, provided the underlying cabinet boxes and doors are structurally sound. Refinishing changes the colour and finish without the cost of full replacement.
Do you spray cabinets in the home?
Where ventilation and containment allow it, we can spray on-site. Otherwise doors and drawer fronts can be sprayed in a controlled area and reinstalled once cured.
How long before cabinets can be used normally after refinishing?
Surface dry happens within hours, but full hardness typically takes longer, so we advise gentle use for the first stretch of days to avoid marking a still-curing finish.
Can laminate cabinets be painted?
Yes, with a bonding primer specifically formulated for laminate surfaces. Skipping this step is the most common reason laminate cabinet paint jobs fail early.
Do you match existing kitchen trim or walls?
We can coordinate cabinet colour with existing walls, trim, or countertops as part of the assessment.
Considering a Cabinet Refresh Instead of a Replacement?
Reach out for a quote on refinishing your kitchen or bathroom cabinets.
Email Us for a Free EstimateWeather sets your painting window — email us to plan the job.
Summer painting conditions in Toronto, ON
Summer heat and humidity around Toronto, ON can make exterior paint dry too fast and blister, so timing and technique matter — early-morning starts and quality coatings hold up best in the heat.
Proudly Serving Toronto, ON
Local, on-time service throughout Toronto and the surrounding area.